Ares™ 2.0
Functional Trainer
Lat Pulldown/Low Row
Rack Cable Attachment Builder
Lat Pulldown/Low Row
Rack Cable Attachment Builder
*Power rack and accessories will ship prior to the pre-order ship date.*
Functional Trainer
Lat Pulldown/Low Row
Rack Cable Attachment Builder
WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information: https://www.p65warnings.ca.gov/
OVERVIEW
PRODUCT FEATURES
PRODUCT DIMENSIONS
MEDIA GALLERY
FAQS
-
What exercises can I do on the Ares™ 2.0 attachment?The number of cable exercises you can perform is long, but just to name a few: bicep curls, tricep pushdowns, tricep extensions, standing or seated chest flies, rear delt flies, lateral leg raises, donkey kicks, lateral and frontal arm raises, rehab/prehab shoulder work, mid rows (on the floor or on a bench), low rows (by sitting on a bench), lat pulldowns, wood chops, face pulls, chest press, belt squats with our attachment, and since there are so many attachment points, it is easy to superset between exercises. Check out a full-body cable workout you can do on the attachment here.
-
Which power racks are compatible with the Ares™ 2.0 attachment?Only the PR-4000 and PR-5000 power racks are compatible with the Ares™ 2.0 attachment. For the PR-4000, you need to have the 16” crossmembers with vertical holes. Please reach out to Support via our Contact Us form with any questions, comments, or concerns. PR-5000 owners should verify they own the most updated version of the PR-5000 power rack, which has 1” holes along the upright, whereas the original version has alternating 5/8” holes and 1” holes. The Ares™ 2.0 attachment is not compatible with any flat-footed rack configuration, and we will not be creating an attachment for them: Omni, Apollo™, or original HR-5000.
-
What rack configurations will the Ares™ 2.0 attachment fit on?
* The PR-4000 6-post rack with 16", 24", 30", or 41" crossmembers in the front with 16" crossmembers in the back.
* The PR-4000 4-post rack with only the 16" crossmembers.
* The PR-5000 6-post rack with 16", 30", or 41" crossmembers in the front with 16" crossmembers in the back.
* The PR-5000 4-post rack with only the 16” crossmembers.
-
What is the weight capacity on the trolley and cables?
The weight capacity for both the cable and the trolleys is 450lbs.
-
What is the benefit of storing the trolleys at the bottom versus the top of an upright?
Storing trolleys at the bottom of an upright allows you to have a greater range of height placement for attachments. When you store them at the top of the upright, it takes away from attachment (i.e. J-cup) height options, especially on 80" racks.
-
How are the cables routed compared with the original Ares™?
The cable orientation to the trolleys is reversed from the original Ares™, allowing more room and higher attachment points for J-cups and other attachments. For more ways the original Ares™ attachment is different from the 2.0 version, check out this blog.
-
How much do the weight stacks weigh?The weight stacks are 260lbs each with the option to upgrade them to 310lbs each. They also come with labels that tell you how the weight stacks feel for ease of use. No math required.
-
Do I need to bolt down my rack with the Ares™ 2.0 attachment ?The Ares™ 2.0 attachment 6-post configuration will not need to be bolted down. However, we always recommend bolting the rack down for safety. With the 4-post Ares™ 2.0 attachment, you will either need to bolt it down or use Mini Front Foot Extensions off the front and back of the rack. If you prefer to bolt down your rack, you can delete the Mini Front Foot Extensions from your cart.
-
What if I cut out holes in my mats for the uprights?
You will also need to clear a section in the back so the Ares™ 2.0 components can rest on the floor.
-
If I eventually change the depth of my rack, will my Ares™ 2.0 attachment still work?You will need to change your cable length if you change the depth of your rack. Cable packages can be sold separately so you can upgrade.
-
Will there be a plate-loaded version of the Ares™ 2.0 attachment?
We are working on quite a few cable attachment options, including plate-loaded and selectorized, but they may not look exactly like the Ares™ 2.0 attachment. We do not currently have any public release dates for these new products.Learn more about the different cable attachments and how to use them here.
-
Is there a difference in functionality between the 80" and 93" upright height options?
The 80" upright height option has a shorter range of motion for lat pulldowns, trolley height adjustments, and attachment height adjustments. This is due to the 80" rack being shorter than the 93" rack.
-
Do I need a specific color of uprights?
Not necessarily. While the matte black finish does have some texture, the trolleys will still work just fine. But the trolley will work best on our other finishes.
-
Can you use other cable attachments with the Ares™ 2.0 attachment?Yes, check out our cable attachments collection. Note: The headplate was designed to be light enough for lifters wanting to perform rehab motions like rotator cuff work. To keep the headplate from rising during weight adjustment, we recommend attachments on the front handles weighing less than 3.5lbs, or lightly press on the headplate while adjusting the pin if you're using a heavier attachment.
-
What else should I consider getting with my Ares™ 2.0 attachment?We recommend getting additional cable attachments, as well as upgrading the Ares™ 2.0 attachment weight stacks.
-
What if I already own a Lat Pulldown & Low Row attachment?The Ares™ 2.0 system completely replaces our current plate-loaded or selectorized lat pulldown and low row attachment with a selectorized lat pulldown and seated row and functional trainer system all in one. (“Selectorized” refers to your ability to select the desired weight with a pin.)
-
Does the Ares™ 2.0 attachment work with a Rear Base Stabilizer?
No, the Ares™ 2.0 attachment completely replaces the Rear Base Stabilizer.
-
Is the Ares™ 2.0 cable attachment compatible with the Compact Logo Plate Crossmember?Yes, but you will need to remove the REP logo plate itself to install the Ares™ 2.0 attachment. This logo plate can be reattached to another crossmember of your choosing.
-
Are any pull-up bars not compatible with Ares™ 2.0 attachment?The Multi-Grip Pull-Up Bar is not compatible with the 16” + 16” crossmember configuration. The globe grip is not compatible with the 41” front crossmember + 16” back crossmember configuration. The globe grip was updated in 2020. The older version will not work with any configuration of the Ares™ 2.0 attachment. The 4-post configuration is compatible with our new mounting brackets (coming soon) that will allow you to mount a straight pull-up bar.
-
Will the MSS 2.0 72" Dumbbell & Kettlebell Storage Shelf work with the Ares 2.0?
Yes, but the MSS 2.0 72" Dumbbell & Kettlebell Storage Shelf will not work on the lower portion of a rack with the Ares 2.0 due to the mounting brackets required to attach the shelf. The shelf will need to be attached anywhere above the Ares 2.0 shroud.
-
Can I use the Pegasus™ with the Ares™?
The Pegasus™ attachment will mount to the front uprights. Lifters will not be able to use if for the lat pulldown portion.
-
Can I use the ISO Arms?Yes! The Ares™ 2.0 attachment doesn’t interfere with the ISO Arms attachment, so you have plenty of space to do ISO rows, deadlifts, squats, a variety of presses, belt squats, monolift bench presses, banded jumps, and more.
-
Can I use the Belt Squat?
Yes! The Ares™ 2.0 attachment doesn’t affect the functionality of the Belt Squat attachment. So in addition to belt squats, you can do weighted pull-ups, hip thrusts, rack pulls, rows, deadlifts, dips, Bulgarian split squats, calf raises, and more.
-
How do I install the Wing Add-On with the Ares™ 2.0 attachment?
Prior to securing the shrouds, it's necessary to mount the 41" shelves. There's a risk that with vigorous movement, the floating pulley might result in collision with these shelves. Please note that 72" shelves are not compatible with this setup.
-
Is the Ares™ 2.0 attachment compatible with other brands of power racks?No. The Ares™ 2.0 attachment was designed for REP brand PR-4000 and PR-5000 series racks. Even if other racks have a 47” rack, there is no standardization across hole patterns, metric measurements, height, thickness of powder coat, etc. We will not guarantee the fit of an Ares™ 2.0 attachment on anything other than a REP rack.
-
How does the Ares™ 2.0 attachment ship?The Ares™ 2.0 attachment ships LTL Freight. A semitrailer will arrive with a wooden crate, and inside the crate, we’ve securely packaged the Ares™ 2.0 attachment in multiple boxes to allow just a single person to bring it into their garage, basement, or gym. We are shipping over 1,000lbs, and this is the most secure and protected way to ship the Ares™ 2.0 attachment to you. If you purchase the Ares™ 2.0 attachment with a rack, weight storage, or additional attachments, those components will ship before the Ares™ 2.0 attachment.
-
What is the difference between the selectorized dual Athena™, the selectorized Lat Pulldown & Low Row, and the Ares™ 2.0 attachment?
Aside from the price point, the Ares™ 2.0 attachment provides a higher weight capacity and the capability for iso-lateral lat pulldowns and low rows. Additionally, the low row height is set at 13" compared with the Lat Pulldown & Low Row. Read about all of the differences between REP's cable machines here.
-
Can I upgrade my original Ares™ or any of the components to an Ares™ 2.0 attachment?
No, we have updated too many parts and features to transform the original Ares™ into the 2.0 version. No components of the 2.0 will be compatible or made available for the original.
-
Is there a more budget-friendly option?
Yes. Our original Ares™ is currently on sale.
-
Will there be an updated version of the Ares™ in the future?
At the core of our company lie three fundamental pillars: innovation, customer service, and value. We continuously strive to uphold these principles, ensuring that every REP product and experience maintains its relevance and excellence. There's always the possibility of an updated version for any REP product.