If you are having issues with the builder, please use Chrome or a desktop.
*If you purchase a 4-Post 80" Athena™ please be aware of the following: The maximum trolley height may effect usable space for J-Cup placement. We would advise individuals use caution while squatting with the trolleys above the bar when unracking and reracking the barbell.*
Build your rack
- Dual
- Left
- Right
- 80"
- 93"
-
Metallic Black
-
Red
-
Blue
-
Clear Coat
-
White
-
Matte Black
-
Standard
-
Round 2.0
-
Lowered 2.0
-
Flat 2.0
- 1.25"
- 2"
- Raw
- No
- Yes
Athena™
Wall-Mounted
Side-Mount Functional Trainer
WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information: https://www.p65warnings.ca.gov/
OVERVIEW
PRODUCT FEATURES
PRODUCT DIMENSIONS
MEDIA GALLERY
FAQS
-
What does selectorized mean?
On selectorized equipment, you change the weight using a pin and weight stack, rather than adding plates onto weight horns.
-
What is the lowest weight setting?
The lowest usable weight setting on the selectorized version is 10lbs.
-
What is the cable travel?
The cable travel is 82.8” for the 80” attachment and 106” for the 93” attachment.
-
How does the wall-mounted Athena™ ship?
The wall-mounted Athena™ will ship ground or freight depending on quantity purchased or if the unit(s) are purchased in conjunction with other large/heavy items.
-
What is the warranty information?
Structural welds on attachments and frames have a lifetime warranty. Pop-pins, pulleys, bearings, cables, and hardware have a one-year warranty.
-
Will the wall-mounted Athena™ still work if my floor isn't level?
The wall-mounted Athena™ was designed with leveled floors in mind. However we know not all floors may be perfectly level, and there is room for the standard slope of a floor. For extremely unlevel floors, you may run into issues with installation.
-
Are the ISO Arms or Spotter Arms compatible with the wall-mounted Athena™?
Spotter Arms: Yes, when properly installed, the wall mounted Athena™ is very stable. We've tested the spotter arms up to 950lbs. As for the ISO Arms, they are not compatible with the wall mounted Athena™.
-
Will this work on my non-REP rack?
We cannot guarantee compatibility due to machining/manufacturing differences between companies.
-
What is the number one reason to consider REP's racks versus another brand?
Many attachments are available now and more are in development. A rack’s attachment ecosystem is one of the biggest reasons why you would choose one versus another. When you purchase a power rack, you’re buying into the company’s ability to come out with new attachments that add additional functionality over the life of your power rack. Our engineering team is hard at work developing new attachments every year, and we believe this is one of our biggest differentiators.
-
How do REP's racks compare to others on the market?
Check out our blog, "How to Compare Power Racks", for more information.
-
Which J-cups should I go with? Standard, Flat Sandwich, or Round Sandwich J-cups
Take a glance at our comprehensive comparison of each of them.
-
Does this come with concrete mounting hardware?
Concrete anchors are included to bolt the uprights to the floor. If you would like to mount the stringer to concrete, we suggest purchasing 5/16”x3” HWH Large Dia Concrete Anchors, washers, and ¼"x7” drill bit.
-
What is included with a wall-mounted Athena™?
The wall-mounted Athena™ is a comprehensive package that comes complete with a dual-sided selectorized Athena™, a pair of uprights, metallic black crossmembers, a rear base stabilizer, a pull-up bar, a pair of j-cups, a stringer, and all the required hardware.
-
Is the wall-mounted Athena™ stable?
Yes. The stringer must be installed properly. With the combination of the weight stack(s) ,the rear base stabilizer, and bolting the uprights down, the wall-mount Athena™ is as solid as can be.
-
Will this wall-mounted Athena™ rear base stabilizer fit my non-REP bench?
We cannot guarantee compatibility with non-REP products. The wall-mounted Athena™ rear base stabilizer was engineered to fit the rear foot of all REP Benches to allow for incline benching up to 30 degrees.