82" Ball & Plate Shelf

The 82" Ball & Plate Shelf is a heavy-duty weight shelf for bumper plates and weighted balls. A long, uninterrupted, shelf between 5000 Series uprights gets all of it off the ground.

The REP® Difference

Shaped for a Plate: The shelf is contoured to the rounded profile of a bumper plate, so plates settle into the cradle and stand on their own instead of propping against a wall, a post, or each other. Contact is spread out to two primary contact points along the arc rather than loading one edge.

Balls That Stay Where You Put Them: A wall ball on a flat surface is a wall ball on the floor a few minutes later. This shelf is built to hold round equipment in place, so your ball collection stops migrating into the middle of the room.

Rated for Dense, Concentrated Loads: Bumper plates put more weight into less shelf than almost anything else in a gym. That's the load this shelf is designed around, not an edge case it tolerates.

Shares Uprights With the Rest of the System: Mount it on the same uprights as the dumbbell and kettlebell shelves and one tower carries plates, balls, and free weights on separate tiers — a single column of home gym storage instead of three separate solutions.

Mounts Clean the First Time: Straightforward hardware and mounting points that line up on the first attempt. Plan on two people for an 82" lift.

Why a dedicated ball and plate shelf?

Plates and balls default to the floor because the usual answers each solve half the problem. A vertical tree covers weight plate storage and leaves the round equipment homeless. Flat gym shelves hold a ball right up until something bumps it, so exercise ball storage ends up being the floor by default. Plates lean against drywall where they mark it and roll; balls drift into the walking path. Those are the two categories that consume the most floor and cause the most trouble once they're on it. Putting both on one surface at chest height is the straightforward fix, and it's real home gym organization rather than a tidier pile.

Product Highlights:

Width: 82"

Plate Capacity: Up to 22 bumper plates per shelf at 45 lb / 20 kg, on 79.843" of usable rail against a 1,000 lb rating.

Ball Capacity: 6 medicine balls at 14" diameter, across the full 82" width. Smaller balls fit more.

Load Rating: 1000 lbs per shelf.

Finish: Metallic Black.

Compatibility: REP 5000 Series uprights, as an in-rack power rack shelf, an off-rack extension, or free-standing.

Build It Into Your Setup

Buy it here if you're adding a shelf to a rack or storage tower you already own. Use a builder if you're configuring a new setup or a larger addition:

Stand-Alone Modular Storage System 2.0

Adonis™ – Cable Tower With Storage

Off-Rack Storage 2.0

In-Rack Storage 2.0

Wing Add-On Storage 2.0

Building free-standing outside a builder? You'll need this shelf plus, at minimum:

5000 Series Storage Uprights or PR-5000 Rack Uprights

5000 Series Storage Feet

Storing free weights too? Add the 41" Dumbbell & Kettlebell Shelf for a single bay or the 82" Dumbbell & Kettlebell Shelf for a matching double-wide span. Either one gives you dumbbell storage and kettlebell storage on a separate tier, and the pair turns one wall into a complete gym equipment organizer.