RIG ATTACHMENT DICTIONARY
BASIC RIG ATTACHMENTS
PULL-UP BAR/CONNECTORS
PULL-UP CONNECTOR
OVERVIEW
This 6' long, 1.25" thick, straight bar is the traditional pull-up bar style and is a great, basic start for your rig and gym. The bar is heavy duty and made from 7-gauge steel. It features a textured, matte black finish to provide a secure grip. Use this pull-up connector for pull-ups, muscle-ups, and more.
COMPATIBILITY
- 4000 Series
NOTE: 1.25" Pull-Up Bar, 2" Pull-Up Bar, and Raw Pull-Up Bar and connectors must be staggered - 5000 Series
DOUBLE-BAR CONNECTOR
OVERVIEW
This connector features the 1.25" thick straight bar on both the lower and upper bar. Use the traditional pull-up bar for pull-ups and more. The upper bar provides extra strength and support. Both have a textured, matte black finish. This is specifically engineered to stabilize the rig when positioned in the center and spans across the rig as demonstrated in our Rig Builder. It comes in two sizes: 41" or 72" (6').
COMPATIBILITY
- 4000 Series
NOTE: 1.25" Pull-Up Bar, 2" Pull-Up Bar, and Raw Pull-Up Bar and connectors must be staggered - 5000 Series
TRI-BAR CONNECTOR
overview
This connector features the 1.25" thick straight bar on all lower, middle, and upper bars. Use the traditional pull-up bar for pull-ups and more. The lower and middle bars provide multiple height options, allowing you to work from either position while maintaining the same stability as the Double-Bar Connector. All have a textured, matte black finish. It comes in two sizes: 41" or 72" (6').
COMPATIBILITY
- 4000 Series
NOTE: 1.25" Pull-Up Bar, 2" Pull-Up Bar, and Raw Pull-Up Bar and connectors must be staggered - 5000 Series
1.25" PULL-UP BAR
OVERVIEW
The 1.25” Pull-Up Bar is a traditional, straight pull-up bar and a great, basic start for your gym. The bar is heavy duty and made from 4.5mm steel. It is a required component of your rig build.
COMPATIBILITY
- 4000 Series
NOTE: 1.25" Pull-Up Bar and connectors must be staggered - 5000 Series
2" PULL-UP BAR
OVERVIEW
Add a grip challenge to your power rack with the 2” Pull-Up Bar. At 2” thick, this straight bar brings an extra challenge by being thicker than a traditional 1.25” pull-up bar. It’s also heavy duty, made from 11-gauge steel. A pull-up bar is a required component to your rig build.
COMPATIBILITY
- 4000 Series
NOTE: 2" Pull-Up Bar and connectors must be staggered - 5000 Series
RAW PULL-UP BAR
overview
The Raw 1.25" Pull-Up Bar is an upgrade from the standard pull-up bar, with bare steel for a more secure grip and the best feel due to the pitted texture. Bare steel requires less chalk and provides a premium aesthetic. A pull-up bar is a required component to your rig build.
COMPATIBILITY
- 4000 Series
NOTE: Raw Pull-Up Bar and connectors must be staggered - 5000 Series
J-CUPS
The hooks that attach to a power rack or rig that hold the barbell in place at a certain height when you’re not using it.
STANDARD J-CUPS
OVERVIEW
Standard J-cups are the most cost-effective option. They’re super easy to use; just slide them into the uprights. They feature a protective plastic lining and recessed hardware to protect your barbell. They’re precisely laser cut and made extra tough.
COMPATIBILITY
- 4000 Series
- 5000 Series
LOWERED J-CUPS
OVERVIEW
Lowered J-cups are larger and lowered 1” below the standard J-cups. They create 1” hole spacing on a rack with 2” hole spacing when in use with the Standard J-cups. This allows you to set a more specific bar height on your rack for a better liftoff.
COMPATIBILITY
- 5000 Series
FLAT SANDWICH J-CUPS 2.0
OVERVIEW
Upgrade your power rack with Flat Sandwich J-cups 2.0. These versatile, heavy-duty cups are taller for easy reracking and feature a larger opening than Standard J-cups, great for oversized, specialty bars. The 2.0 version brings an elevated finish to your power rack, with high-end details like a laser-cut, metallic black REP logo plate with a stainless-steel backing – the reverse of the original design for an extra pop.
COMPATIBILITY
- 4000 Series
- 5000 Series
ROUND SANDWICH J-CUPS
OVERVIEW
Round Sandwich J-cups feature a super secure “doesn’t move” resting point and a dual-lock wraparound design for peace of mind when there's heavy weight on the bar. Plastic lining protects your bar and the uprights. High-end finishes include a stainless-steel REP logo. These cups fit bars with diameters less than 40mm.
COMPATIBILITY
- 4000 Series
- 5000 Series
ROUND SANDWICH J-CUPS 2.0
OVERVIEW
Round Sandwich J-cups 2.0 feature a super secure “doesn’t move” resting point. Plastic lining protects your bar and the uprights. They feature high-end finishes, such as a laser-cut metallic black REP logo plate with a stainless-steel backing, and they’re laser cut and bent with rounded corners. These cups fit bars with diameters less than 50mm.
COMPATIBILITY
- 4000 Series
- 5000 Series
wall-mount connectors
OVERVIEW
Metal bars that connect the rig to a stringer or directly to the wall, enabling the creation of a wall-mounted rig. They are a necessary component for a wall-mounted rig.
COMPATIBILITY
- 4000 Series
- 5000 Series
STRINGER
OVERVIEW
A multifunctional product to mount your rigs to the wall. The direct connection of a stringer ensures accurate rig spacing and added stability during your workouts.
COMPATIBILITY
- 4000 Series
- 5000 Series