Landmine Training for a Small Home Gym

By: REP Marketing
Updated On: Nov 18, 2026
Lifter doing landmine rotations on REP power rack

If you lift in a single-car garage, a basement corner, or a compact studio, you know the real challenge isn’t always with your weights. It’s often with your floor plan, where every new machine means one less spot to stand.

That’s where landmine training earns its keep, allowing you to get in a full-body session in a small footprint. Here’s everything you need to build a landmine station, map out your space, and start training with workouts and exercises for every level.

Why Landmine Training Wins for a Small Home Gym

Landmine training turns a barbell, a compact rack attachment, and weight plates into a full-body strength system that fits almost anywhere. One end of the bar pivots from the rack while the working end moves through smooth, easy-to-control arcs, giving you pressing, rowing, squatting, hinging, lunging, and rotation without crowding your floor.

Setup is as simple as loading plates on one end, and the angled bar paths are friendly to your shoulders, hips, and spine. Progress is easy to measure with small plates, longer ranges, and tempo work, and everything stores on your rack. It’s about as versatile as it gets in limited space.

The Essentials: Landmine Training Equipment That Fits Your Space

Your landmine training equipment list is short: a power rack or free-standing base, a landmine attachment, a barbell, and plates. An adjustable bench is a useful extra.

Power Rack

Your rack serves as the anchor, keeping the bar secure, adding storage, and setting clear bar paths. If you run a space-optimized rack, like the PR-1100 Power Rack, mount the landmine on the front so the bar sweeps away from the wall.

An upgraded pick, like the PR-4000 Power Rack, balances space, strength, and expandability, while the PR-5000 Power Rack is ideal for heavier lifters and coaches who swap attachments often and want maximum stability in a compact package.

Landmine Attachment

A rack-mounted landmine attachment locks your bar into a smooth, multi-direction sleeve and keeps your floor clear. Mount it low on a front post to create room for pressing and rotation. If you don’t have a rack, the Free Standing Landmine sits on the floor and can be secured in a corner.

Read More: The Ultimate Guide to REP Landmines: Which One Is Right for You?

Barbell

Any straight barbell works, but a full-length bar gives you more load headroom and a smoother arc. Be sure to use collars on every set.

Weight Plates

Weight plates in pairs from 2.5 pounds and up cover warm-ups through top sets, allowing for gradual progression in both landmine and standard barbell work.

Adjustable Bench

An adjustable bench expands your press, row, and split-squat options and stores upright against the wall.

Setups and Space Maps: Rack Mounts, Bar Paths, and Storage

Lifter performing a single-arm overhead press with a loaded barbell in the REP Free Standing Landmine.

Most landmine exercises need about eight to nine feet of clear floor in front of the pivot and roughly six feet of width, since a standard barbell is about seven feet long and you stand at its far end. Dial in your layout once, and every landmine workout can feel plug-and-play.

Corner Setup

Leave at least 18 inches between the rear uprights and the wall for plate storage and hand clearance. Mount the landmine low on the front upright closest to your open space so the bar’s working end points into your free corner. Store plates on the rear pegs and park your bench vertically against a side wall.

Wall Setup

Center your rack on the wall, keeping at least 24 inches clear on each side for stance changes. Set your bench lengthwise in front of the rack for half-kneeling presses and chest-supported rows.

Open Bay Setup

In a full garage bay, place the rack forward to leave room behind it for plate storage and open up the full arc in front, giving you a clean line for rotations, squats to press, and reverse lunges. Keep lighter plates on the front pegs for quick changes and heavy plates on the rear pegs for stability.

Pro Tip: Mark a gentle arc on the floor with painter’s tape to learn where your bar travels on presses, rows, and rotations. A second arc for rotational work shows you where to pivot your feet.

Bar Path and Ceiling Notes

On presses, keep the bar path just inside your shoulder line; think up and slightly forward. On rows and hinges, pull the bar toward your hip — not your ribs — keeping it close to your midline. On rotations, pivot your feet and rotate through your hips and upper back, keeping your pelvis square at the finish.

Kneeling and half-kneeling work reduce how much overhead space you need. If your ceiling is low, press from your knees.

Read More: How to Build an Amazing Compact Home Gym in a Small Space

10 Must-Do Landmine Exercises with Coaching Cues and Regressions

These landmine exercises cover every major movement pattern, each with a regression to scale it to your level. For more ideas, check out 17 different ways to use a landmine.

1. Standing Landmine Press

Stagger your stance and stack your wrist over your elbow, then press up and slightly forward until your biceps finishes near your ear. To regress it, switch to a half-kneeling press to reduce the balance demand.

Read More: Landmine Press: The Underrated Move Your Routine’s Been Missing

2. Landmine Row

Hinge to a flat back, grip the end of the bar with one or both hands, and pull toward your front hip, squeezing your lats at the top. For an easier version, go chest-supported on a bench to lock your torso in place.

Read More: How to Do a Landmine Row: Technique, Variations, and Benefits

3. Landmine Front Squat

Cup the end of the bar at chest height with your elbows down, then sit between your heels while keeping the bar close to your sternum. Squatting to a box helps you groove your depth.

4. Reverse Lunge from Landmine Front Rack

Hold the end of the bar high at your chest and step back into a long stride, keeping your front knee tracking over your midfoot as you drive through your front heel. A split squat without stepping makes it easier.

5. Landmine Hip Hinge

With your hands on the end of the bar and your arms long, push your hips back while keeping your shins near vertical, then stand tall and squeeze your glutes. To regress it, shorten the range with a box touch.

6. Meadows Row

Stand perpendicular to the bar, hinge, and grab the end of it with your far hand, then pull toward your hip with your elbow tight. Master the two-handed landmine row first.

7. Single-Arm Tall-Kneeling Landmine Press

Kneel on both knees, squeeze your glutes, and keep your rib cage down as you press with one arm without leaning back. Switch to half-kneeling for a wider base if needed.

8. Landmine Rotations

Hold the end of the bar with both hands at chest height and rotate from hip to hip, pivoting both feet and keeping your pelvis square at the finish. To regress it, swap in an anti-rotation press or shorten the range.

Read More: Master the Medicine Ball Rotational Throw for Explosive Power

9. Single-Leg Landmine RDL

Hold the end of the bar in the hand opposite your standing leg, keep a soft knee, and hinge while reaching the bar toward your mid-shin with your hips square. A kickstand RDL adds support while you build balance.

10. Squat to Press

Front squat the bar, then stand and press it in one smooth motion, bracing before each rep and controlling it on the way down. To simplify it, separate the squat and press into two sets.

Landmine Workout Blueprint: Beginner, Strength, and Conditioning Tracks

Use these landmine workout tracks as templates. Pick one path for six to eight weeks, then rotate.

Beginner Track (2 to 3 Days per Week)

Rest 60 to 90 seconds between sets.

Session A

  • Single-arm half-kneeling landmine press: 3 x 8 per side
  • Landmine squat to box: 3 x 8
  • Landmine row: 3 x 8
  • Landmine anti-rotation hold: 3 x 20–30 seconds per side

Session B

  • Single-arm tall-kneeling landmine press: 3 x 8 per side
  • Landmine hip hinge: 3 x 8
  • Reverse lunge from landmine front rack: 3 x 8 per side
  • Landmine rotations: 3 x 8 per side

Strength Track (3 Days per Week)

Rest 3 to 5 minutes between sets of the first lift, then 1 to 2 minutes between sets of the others.

Day 1: Press Focus

  • Single-arm standing landmine press: 5 x 5 per side
  • Landmine row: 4 x 6–8
  • Single-leg landmine RDL: 4 x 6–8 per side

Day 2: Lower Focus

  • Landmine front squat: 5 x 5
  • Reverse lunge from landmine front rack: 4 x 6–8 per side
  • Anti-rotation press (Pallof-style): 4 x 10-second holds per side

Day 3: Pull and Rotate

  • Meadows row: 5 x 5 per side
  • Single-arm tall-kneeling landmine press: 4 x 6–8 per side
  • Landmine rotations: 4 x 6–8 per side

Conditioning Track (2 to 3 Days per Week)

Run this circuit for 3 to 5 rounds, resting 60 to 90 seconds between rounds.

  • Squat to press: 8 reps
  • Single-arm landmine row: 10 reps per side
  • Reverse lunge from landmine front rack: 6 reps per side
  • Landmine rotations: 8 reps per side
  • Landmine hip hinge: 10 reps

Progression, Safety, and Next Steps in Your Landmine Training

Progress the Simple Way

Start with a weight you can move with clean form and one or two reps in reserve. Once all your sets move well, add 2.5 to 5 pounds or one rep per set. You can also reach an inch deeper on hinges, add a two-second pause at the bottom of squats and presses, or move from half-kneeling to standing or from two feet to a split stance. An extra set works too.

For conditioning, tack on a round, shorten your rest, or load an additional light plate once you’re ready to step it up.

Safety First in a Small Home Gym

Before you load the bar, confirm the landmine attachment pin is fully locked. Secure your plates with collars on every set, too, since the arc can move them outward. Keep the bar’s travel lane clear of your feet, walls, storage, and other equipment. Hold your wrists neutral on presses and rows, and keep your hips and ribs stacked on kneeling work. Park the bar back on the rack before you move your bench or plates.

Next Steps

Build out the same rack with attachments for pull-ups, dips, and cable work to make your small home gym more robust. Keep your plates organized for easy changes. Every six to eight weeks, rotate tracks or repeat your favorite with heavier loads.

Takeaway

When floor space is at a premium, you’ll be hard-pressed to find a better return on investment than landmine training. Mount a permanent landmine station on your rack to streamline your space, expand your landmine exercises, and turn one barbell into a full training solution.

FAQs

Do I need a full power rack for landmine training, or will a base work?

A base will work, but a rack is the cleaner option. A rack-mounted landmine keeps your floor clear, stabilizes the pivot, adds storage, and sets consistent bar paths. A free-standing landmine gets the job done if you don’t own a compatible rack.

How much space do I need for a landmine workout in a garage or spare room?

About eight to nine feet in length and six feet in width. Give rotations, reverse lunges, and squats to press the most room, and keep 18 to 24 inches between the rack and walls for storage and hand clearance.

What barbell works best with a landmine attachment?

A full-length straight bar. Any straight barbell works, but a full-length bar gives you more load headroom and a smoother arc. Always use collars.

Is landmine training shoulder- and back-friendly?

Yes. The angled path lets you press without cranking into strict overhead positions, and hinges and rows track close to your centerline, which helps you brace. Keep a neutral wrist and stop a rep or two before your form breaks down.

How should I progress without overdoing it in a small home gym?

Gradually. Add 2.5 to 5 pounds or one rep per set when everything feels crisp. You can also slow the tempo, add a pause, or move from kneeling to standing. Taking a lighter week is always an option, too.

This article was reviewed by Matt Gavin, NASM-CPT, for accuracy.

NEWSLETTER SIGNUP

Product launch information, promotions, blogs, and REP news.